Professional Wireless Door/Window Magnetic Contact

1.Wireless PIR Detector 2.In order to install and adjust conveniently, we provide bracket. 3.You should fix the bracket

*NAME: WIRELLESS DOOR/WINDOW MAGNETIC CONTACT

MODEL: PH-WMC

Specification

 

Power requirements: DC=12V-8.4V(A23 DC=12V battery inside)

Current consumption: less than 20μA; Less than 15mA while transmitting

Transmit frequency: 315±0.2MHz

Transmit duration: less than 1s

Transmit distance from host: more than 80m(no obstacle); less than 15mm between  partand part B

Temperature: -10°C to 40°C

Humidity: less than 90%

 

 

 

Installation

 

We define the Magnetic door/window contact for two parts: part A and part B. First pack the battery into the part A, and then according to the show of sketch map to fix part A and part B (with screws is more better) on the monitored door/ window. It is better if the distance between them is closer.

 

Use

 

You should better pull out the antenna wholly, and then open the monitored door/window. It is all right that the work LED shows. At the same time, the host will alarm. If the work LED doesn’t show or host doesn’t alarm, please check whether the low power LED is show. If yes, please change battery. If no, please contact with seller

Professional Wireless Door/Window Magnetic Contact